Easy to use
Switching from one operation mode to another simply involves rotating the drum, which takes a couple of seconds.
|
 |
 |
Practical !
Some of the heat produced can be routed to an adjacent room.
|
|
 |
Easy to install
It just requires a recess to fit in. No cladding is required and the hot air outlet is integral. The fireplace is easily connected to the chimney flue and no finishing or decoration work is required.
And if no recess has been planned then, Stûv has an alternative
Fresh air
A fresh air inlet of minimum 100 cm2 must imperatively be provided at the base of the stove. A register will shut-off air supply when the hearth is not in use.
|
|
